The SC-IW bass output is from 22 Hz to 120 Hz at 3dB down using a 4"x14" rectangular, patent pending T-shaped driver for use in new construction and retrofits within a standard 2x4 framed wall. The unique driver design fires vertically in your wall to minimize vibration while accurately reproducing the most demanding home theater and music.

The SC-IWDVR combines with the SC-IWBB Back Box to form a sealed 2-cabinet design, so that the driver may be protected during sheet rocking of new construction. You can use the included standard or designer grille to complete the flush wall mount installation.

If you are buying an SC-IW subwoofer, you must first install the SC-IWBB Back Box and also power it with an SC-1250 amplifier to reap the benefits of the model-specific EQ settings; no other amplifier includes these.

Savybės

• Fits FLUSH in a standard 2x4 studded wall
• Easy to install- two box system for new construction or retrofit
• Connects with conventional speaker wire
• Amazingly deep, powerful bass performance with minimal wall vibration
• The matched SC-1250 amplifier (sold separately) can drive one or,
• for ultimate performance, two SC-IW subs
• Includes a standard grille for easy installation and field servicing,
• and a designer-friendly 5" high grille (requires dry-walling over
• driver cabinet), both grilles are paintable to match room decor

Speciifikacijos

• Model Woofer
• Frequency Response (+/-3 dB))
• SC-IW Subwoofer 4" x 14" rectangular driver (3" x 13.25" piston dimensions) 22-120 Hz <5% (typical) 275 oz.
• Neodymium motor structure 3"
• Dual Layer inner/outer wind Yes
• 28.4" x 14" x 3.4" (71.6 x 35.6 x 8.6 cm) Enclosure (only): 19" x 14" x 3.375" (48 x 36 x 8.6 cm)
• Driver (only): 10.5" x 14" x 3.75" (27 x 36 x 9.5 cm)
• Sealed enclosure
• Standard Grille: 17.0" x 13.8" (43.2 mm x 35 mm)
• Designer Grille: 18.0" x 4.64" (45.72 mm x 11 .8 mm) Three years (electronics)
• Five years (drivers)
• 2 Cartons = Carton 1: 161bs. (7.25 Kg),
• Carton 2: 27 Ibs. (12.25 Kg) Total: 431bs (19.5 Kg)