Jūsų krepšelis tuščias.
Produkto aprašymas
Revel SA1000 Garso stiprintuvas galia 700W, 5A – 100-120VAC-50-60Hz, THD+N prie 1W: <0.3% | Nemokamas Pristatymas
Galingas garso stiprintuvas!
The SA1000 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of Revel's in-wall subwoofer system, this rack mountable Class D component is designed to power the B28W in-wall subwoofer.
The SA1000 single channel, rack mount amplifier has two outputs in parallel, so you can power one B28W subwoofer module with 350W RMS (750W Peak). When a second B28W subwoofer module is connected to the second output of the SA1000 amplifier, the total output power increases to 700W RMS (1500W Peak).
This complete in-wall subwoofer solution with external rack mountable amplifier is designed to complement Revel’s high-performance architectural product portfolio. It delivers dynamic bass and lifelike realism to concealed music and home cinema systems resulting from Revel’s advanced engineering prowess, and comprehensive subjective and objective measuring tests.
SA1000 Savybės
-
User-adjustable Single-band PEQ – Room Equalization
-
Short-circuit and over-current protection
-
Over-temperature compensation
-
Two dual-banana output connectors for easy connection
-
Completes in-wall/in-ceiling solutions for music and home theater systems
-
Connect up to two B28W Subwoofers with each SA1000 Amplifier
-
Designed to fit standard 2 x 4 stud frame construction
-
Self-contained subwoofer module with integrated back-box allows for easy retrofit installations
Specifikacijos
| Rated Output Power (RMS) into the minimum impedance of 4 ohms: 700 Watts (350W per Subwoofer) |
|---|
| Peak Power: 1500 Watts (750W per Subwoofer) |
| Rated Impedance: 8 Ohms per speaker output |
| Minimum Load Impedance: 4 Ohm |
| Model-Specific EQ 1: Only for Revel B28C; 2: Only for Revel B28W |
| Input Sensitivity to 1W @ 50HZ: 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB |
| Input Overload (Both Inputs Driven): 2.0Vrms |
| Input Impedance: >10K Ohms |
| Low Pass Crossover Range: 50-150Hz |
| Auto Turn On Input Sensitivity @ 50Hz: Typical 10mV |
| THD+N At 1W: <0.3% |
| THD+N At Rated Output Power: <1% |
| Signal-to-Noise Ratio To 1W: >65dBA |
| Minimum AC Mains Power Requirements Model: 700W, 5A – 100-120VAC-50-60Hz |
| Minimum AC Mains Power Requirements Model: 700W, 3A – 230VAC-50-60Hz |
| Power Consumption (Standby): 0.5W |
| Height: 3.50in (88.90mm) |
| Width: 17in (431.8mm) |
| Depth: 11.04in (280.3mm) |
| Weight: 14 lb (6.35kg) |
Audio Specifikacijos
| Rated Output Power (RMS) into the minimum impedance of 4 ohms | 700 Watts (350W per Subwoofer) |
|---|---|
| Peak Power | 1500 Watts (750W per Subwoofer) |
| Rated Impedance | 8 Ohms per speaker output |
| Minimum Load Impedance | 4 Ohm |
| Model-Specific EQ 1 | Only for Revel B28C; 2 |
| Input Sensitivity to 1W @ 50HZ | 16.3mVrms +/- 1dB (Single input driven) Gain = 41.7dB |
| Input Overload (Both Inputs Driven) | 2.0Vrms |
| Input Impedance | >10K Ohms |
| Low Pass Crossover Range | 50-150Hz |
| Auto Turn On Input Sensitivity @ 50Hz | Typical 10mV |
| THD+N At 1W | <0.3% |
| THD+N At Rated Output Power | <1% |
| Signal-to-Noise Ratio To 1W | >65dBA |
| Minimum AC Mains Power Requirements Model | 700W, 5A – 100-120VAC-50-60Hz |
| Minimum AC Mains Power Requirements Model | 700W, 3A – 230VAC-50-60Hz |
| Power Consumption (Standby) | 0.5W |
| Height | 3.50in (88.90mm) |
| Width | 17in (431.8mm) |
| Depth | 11.04in (280.3mm) |
| Weight | 14 lb (6.35kg) |
