Electronic Specifications
Note: all measurements with EQ filters and output filters bypassed.
- Frequency Response
- +0, -0.5dB from 20Hz to 20,000Hz
- Total Harmonic Distortion
- 0.002% from 20Hz to 20,000Hz
- Maximum Input Voltage
- 4.5V Unbalanced and Balanced
- Output Voltage
- 2.0V Unbalanced and Balanced
- Maximum Output Voltage
- 4.5V Unbalanced and Balanced
- Signal To Noise Ratio (A-Weighted)
- 100dB
- Input Impedance
- 10K ohms Unbalanced and Balanced
- Voltage Gain
- 0dB
- Output Impedance
- 50 ohms
- Crossover Filter Types, Order and Slope
- Butterworth, 1st order, 6dB/octave
Butterworth, 2nd order, 12dB/octave
Butterworth, 4th order, 24dB/octave
Linkwitz-Riley, 2nd order, 12dB/octave
Linkwitz-Riley, 4th order, 24dB/octave
Linkwitz-Riley, 8th order, 48dB/octave
Connectivity
- Balanced Input
- 1
- Balanced Output
- 1 (High)
1 (Low)
- Unbalanced Input
- 1
- Unbalanced Output
- 1 (High)
1 (Low)
- Balanced Microphone Input
- 1
- Network Connection
- 1
- USB Input
- 1 (For Service Only)
- USB Input Type
- Type A
Control
- Power Control Input
- 1
- Power Control Output
- 1
- Data Input
- 1
- Rear Panel IR Sensor Input
- 1
General Specifications
- Microphone and stand included
- Yes
- Power Requirement
- 100V ~ 50/60Hz at 35 watts
110V ~ 50/60Hz at 35 watts
120V ~ 50/60Hz at 35 watts
220V ~ 50/60Hz at 35 watts
230V ~ 50/60Hz at 35 watts
240V ~ 50/60Hz at 35 watts
- Standby Power Requirement
- <0.5 Watts
Weights & Dimensions
- Unit Dimensions (W x H x D)
- 17-1/2" (44.45cm) x 6" (15.24cm) x 16-1/2" (41.9cm)
- Unit Weight
- 15 lbs (6.8 kg)
- Shipping Weight
- 24.5 lbs (11.1 kg)