Komplektas ARCAM SA10 integruotas stiprintuvas + MONITOR AUDIO SILVER 300 grindinės garso kolonėlės | Nemokamas Pristatymas

Apie ARCAM SA10

„HDA“ serijos dizainas remiasi visa „Arcam“ patirtimi, kaip viena iš labiausiai gerbiamų Jungtinės Karalystės garso kompanijų, gamindama „Arcam“ geriausią garso gaminių asortimentą - naudojant geriausios kokybės komponentus ir inžinerinę praktiką, „HDA“ serija sukurta ir sukurta taip: suteikti jums metų klausytis malonumo.

• Extremely efficient class A/B amplification
• 50W of power per channel
• 5 analogue inputs including phono
• 3 digital inputs
• 32-bit DAC,Sabre ESS9016K2M
• Full I/P control
• Total harmonic distortion + noise = 0.003%

SA10

In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, we spare no expense in using only the most high-quality components, even if it means the cost of our power supplies overtaking that of everything else.

The result, of course, is worth every penny.

A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life. Fish out one of your all-time favourite albums and play it through a Bluetooth speaker, and guess what? Its sounds like a Bluetooth speaker. Play it through the SA10, and it’s as close to hearing the artist’s performance as you’re likely to get. There’s always joy in digging out an old recording you haven’t heard in years. With the HDA range, it’ll feel like hearing it forthe first time.

TECHNINIAI DUOMENYS

• SA10 Specifications Continuous power output (0.5% THD), per channel Both channels, 8Ω, 20Hz—20kHz 50W
• Both channels, 4Ω, at 1kHz 85W
• Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
• Analogue Inputs Phono (MM) cartridge: Input sensitivity at 1kHz 5mV
• Input impedance 47kΩ + 100pF Frequency response (ref. RIAA curve) 20Hz – 20kHz ± 1dB
• Signal/Noise ratio (A-wtd) 50W, ref. 5mV input 80dB
• Overload margin, ref. 5mV at 1kHz 21dB Line Inputs:
• Nominal sensitivity 1V Input impedance 10kΩ Maximum input 6Vrms
• Frequency response 20Hz – 20kHz ± 0.2dB Signal/Noise ratio (A-wtd) 50W, ref. 1V input 106dB
• Digital Inputs DAC ESS9016K2M Frequency response 20Hz - 20kHz ± 0.05dB
• Total harmonics distortion + Noise 0.0007% Signal/Noise ratio (A-wtd) 115dB
• Supported sample rates
• Optical 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
• Coaxial 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bit depth 16-bit – 24-bit
• Pre-amplifier output Nominal output level 630mV
• Output impedance 230Ω
• Headphone output Maximum output level into 600Ω 5Vrms
• Output impedance 1Ω Load range 16Ω – 2kΩ
• General Mains voltage 110–120V or 220–240V, 50–60Hz
• Maximum power consumption 350W
• Dimensions W x H x D (including feet, control knob and speaker terminals)
• 433x87x310mm
• Weight (net) 8.4kg Weight (gross)
• 10.7kg Supplied accessories Mains leads Remote control 2 x AAA batteries

Apie Monitor Audio Silver 300

Monitor Audio Silver 300 Silver 6G serija trijų juostų 90 dB/W/m jautrumo 8Ω ant grindų statomos garso kolonėlės kaina už. 1 vnt. | Nemokamas pristatymas

Silver 6G serija

Trijų juostų (Gold Dome C-CAM 2.5 cm aukštų, 10 cm RST vidutinių ir 2x RST 15 cm žemų dažnių garsiakalbiai) 90 dB/W/m jautrumo, 8Ω ant grindų statomos kolonėlės. Atkuriamų dažnių juosta 32–35,000 Hz  (-6 dB). Rekomenduojama stiprintuvo galia 80-200 W. Matmenys (a x p x g): 100 x 18.5 x 32.9 cm. Svoris: 20 kg (viena). Apdaila: juodas ąžuolas, natūralus ąžuolas, riešutas, raudonmedis, matinė balta.

SILVER 300

The Monitor Audio Silver 300 floorstander retains the familiar award-winning configuration of its predecessor, with several crucial improvements to drivers. The full three-way design delivers class-leading mid-range, while a pair of long-throw 6½-inch bass drivers work together to produce incredible power from the tall, but slim cabinet design, making it the perfect choice for serious audiophile and AV installations.

The three-way configuration allows each driver to be optimised to do a better job over a narrower frequency band; the only real way to deliver elevated performance in every respect. Superlatively natural mid-range comes courtesy of a dedicated 4-inch driver, specially designed with ‘under hung’ voice coil and motor system. This technique ensures the voice coil always remains in the magnetic gap under all conditions for demonstrably lower distortion than usually found at this level – an advance which can be immediately heard.

Coupled with higher overall impedance and better overall system damping, the cabinet can be placed close to a wall. However, this is a serious audiophile speaker, capable of delivering seismic levels of bass extension. For optimum performance, a distance of just 12 inches (30 cm) is needed between the speaker and wall, allowing the system to breathe and perform optimally. High overall sensitivity makes this new Silver 300 easy to drive with a modest, high-quality amplifier delivering precise, dynamic music or film to fill a medium to large room.

 TECHNOLOGY

• Three-way, four-driver configuration (electrically and acoustically) allows the drivers to be optimised to deliver higher efficiency and lower distortion from a cabinet of this size
• New 25 mm C-CAM, (Ceramic-Coated Aluminium/Magnesium) featuring vented Neo magnet system has been optimised for lower distortion and cleaner-sounding highs
• Specially developed 4-inch mid-range driver with ‘under hung’ voice coil and motor system so the voice coil is always in the magnetic gap, ensuring very low distortion
• Dual 6-inch bass drivers with concave ‘dished’ C-CAM cone profile means better damping and improved mid-range clarity
• RST Cone profile for improved diaphragm rigidity and lower distortion
• Unique-build ring/voice coil-cone coupling mechanism (DCF) optimised to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity
• Cast polymer driver chassis design results in improved rigidity and damping characteristics
• HiVe II port technology for improved transient response and tighter bass, due to smoother airflow
• Pureflow silver-plated OFC copper internal cabling gives the highest quality transfer through the signal chain
• High-quality crossovers with premium grade, bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors ensure maximum signal transfer
• Rigid 20 mm MDF construction utilising scientifically-optimised cabinet bracing
• Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling
• Ultra-low profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted
• Bespoke, high quality bi-wire terminals
• Terminal panel located at floor level for easy termination and neat cable access
• Out-rigger feet (spiked, or rubber for hard flooring) provide attractive appearance while taking up less floor space
• Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes.

SPECIFIKACIJOS

• Design - 3-way
• Frequency response (-6dB) - 32 Hz - 35 kHz
• Efficiency (1W @ 1M) - 90 dB
• Nominal Impedance - 8 ohms
• Minimum Impedance - 3.5 ohms @ 146 Hz
• Maximum SPL - 116 dBA (pair)
• Maximum power (RMS) - 200 W
• Recommended amplifier power - 80 - 200 W
• Bass alignment
• Bass reflex with HiVe II port
• Crossover frequency
• LF / MF: 570 Hz
• MF / HF: 3.5 kHz
• Converters
• 2 x 6 "C-CAM RST woofer
• 1 x 4 "C-CAM RST midrange
• 1 x 1 "(25 mm) Gold Dome C-CAM tweeter
• Cabinet Dimensions (Excluding Grille and Terminals)
• 1000 x 185 x 300 mm
• External dimensions (including grille and clamps (H x W x D))
• 1000 x 185 x 329 mm
• External dimensions (including plates, feet and columns)
• 1034 x 252 x 367 mm
• Weight (pieces) - 20 kg