Jūsų krepšelis tuščias.
Produkto aprašymas
JBL SCL-2 Į sieną montuojamas LCR/Erdvinio garso garsiakalbis galia 445 W (CEA-426B) dažnių juosta (-6 dB): 57 Hz – 25 kHz | Nemokamas Pristatymas
SCL-2 siūlo aukščiausia akustinio performance'o lygi iš visų savo kategorijos montuojamų garsiakalbių!
Part of the JBL Synthesis Custom Loudspeakers range, the SCL-2 offers the highest level of acoustic performance available from a flush-mount loudspeaker. The SCL-2 is designed with a 2.5-way, triple 8-inch (200mm) driver configuration for low-frequency extension with high output capability and powerful dynamics. A D2415K dual voice coil, dual 1.5-inch (38mm) annular ring diaphragm Teonex® compression driver with advanced HDI geometry horn works in conjunction with three powerful cast-frame, 8-inch (200mm) Advanced Aluminum Matrix cone woofers with low distortion motor structures.
The loudspeaker’s 5.5-inch (140mm)-deep enclosure fits standard wall construction applications and features a Sonoglass™ precision molded baffle assembly with integrated HDI waveguide/horn, and a zero-bezel, magnetically-attached grille.The loudspeaker’s enclosure can be oriented with the horn closer to the top or bottom, or on its side for center channel or reduced height applications. SCL-2 systems can be mixed and matched with other SCL speakers or any JBL Synthesis loudspeakers.
Designed to provide ultimate performance and the highest levels of dynamics from any in-wall loudspeaker, the SCL-2 can discretely integrate into any environment and décor. They can also be installed in a traditional application behind acoustic fabric or woven/perforated video screens without installing the grilles. They feature a discrete matte black baffle, HDI waveguide, and transducers, with a paintable white grille. The SCL-2 is the perfect solution for in-wall LCR or surround channel applications as part of JBL Synthesis home theater
SAVYBĖS
- 2½-way, triple 8-inch/200mm driver configuration – ideal for wall mount
- 5.9-inch/150mm deep, rectangular footprint enclosure
- Can be mounted vertically or horizontally for maximum application flexibility and performance
- Computer-optimized HDI Constant Directivity Horn with very smooth and predictable off-axis behavior over a wide coverage area
- D2415K, 1.5-inch/37.9mm annular ring Teonex® diaphragm compression driver with advanced HDI geometry horn
- Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
- Sonoglass® baffle with integrated HDI waveguide for maximum strength and high internal damping
- Solid MDF enclosure installs behind drywall and provides optimized acoustic performance and enhanced acoustic isolation from the wall
- Rubber isolation mounts attach cabinet to wall studs, ensuring a firm yet isolated mounting
- Bi-Wire and Bi-Amp capable network using gold-plated binding posts on rear enclosure, and an easy Molex® baffle to network connection
- Zero-bezel, magnetically-attached grille can be painted to match décor
- Speaker type: 2½-way in-wall loudspeaker
- Low frequency transducer: Three 8” (200mm) cast-frame, Advanced Aluminum Matrix cone woofers
- Mid/High frequency transducer: D2415K, 1.5” (38mm), dual annular ring Teonex® diaphragm compression driver mounted to Sonoglass® horn/baffle
- 445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
- Frequency response (-6 dB on-axis): 57 Hz – 25 kHz
- Coverage area (-6dB@20kHz): 80 x 70 Degrees (Hor x Vert)
- Coverage area (-6dB@10kHz): 100 x 100 Degrees (Hor x Vert)
- Sensitivity (2.83V@1m): 92dB
- Nominal Impedance: 6 Ohm
- Crossover frequencies: 225Hz; 1.3kHz
- Enclosure type: Sealed in-wall mount with included back box
- Inputs: Dual gold-plated binding posts
- Finished grille dimensions (H x W): 40.2” x 12.8” (1020.8mm x 325.5mm)
- Cutout dimensions with backbox (H x W): 38.25” x 11.5” (971.6mm x 292.1mm)
- Mounting depth with backbox: 5.8” (147mm)
- Weight: 53.5 lb (24.3 kg)
- Finishes: Matte Black with white paintable grille
