Produkto aprašymas
Audio-Technica AT-LP5 plokštelių grotuvas / patefonas, nemokamas pristatymas
PATEFONAS
- Type: 2-Speed, fully manual operation
- Motor: DC motor
- Drive method: Direct drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable platter: Die-cast aluminium
- Starting torque: >1.6 kgf.cm
- Braking system: Electronic brake
- Wow and flutter: < 0.2% WRMS (33 RPM)
- Signal-to-noise ratio: > 50 dB
- Output Levels: “PHONO” (Pre-amp bypassed) - 4 mV nominal at 1 kHz, 5 cm/sec
“LINE” (Pre-amp engaged) - 150 mV nominal at 1 kHz, 5 cm/sec - Phono Pre-amp gain: 36 dB nominal, RIAA equalized
- USB function: A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable
Computer interface: USB 1.1 (or higher) compliant Windows XP, Vista or MAC OS X
TONEARMAS
- Type: Static balance shaped tonearm
- Effective Length: 247mm
- Typical Overhang: 17mm
- Maximum tracking error angle: Less than 2.5° curve
- Stylus pressure adjustment range: 0 to 2.5 g
- Applicable cartridge weight range (including headshell): 15 to 20 g
PAGRINDINĖ CHARAKTERISTIKA
- Power supply requirements: 230V AC, 50 Hz
- Power consumption: 6W
- Dimensions: 450.0 mm (17.72”) W x 352.0 mm (13.86”) D x 157.0 mm (6.1”) H
- Weight: 10.5kg
- Accessories included: AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; Exclusive AT-HS10 Lightweight Headshell; AC line cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software
KARTRIDŽO IR HEADSHELL DUOMENYS
- Cartridge Model: AT95EX
- Cartridge Type: VM Design Stereo Dual Moving Magnet
- Recommended load impedance: 47,000 ohms (when using external PHONO preamp)
- Output voltage: 4 mV (at 1 kHz, 5 cm/sec)
- Stylus Elliptical: 0,3 x 0,7 mil
- Tracking force range: 1.5 to 2.5 g (standard 2 g)
- Cartridge weight: (AT95Ex) 5.7 g
- Headshell model: AT-HS10
- Headshell weight: 10g
- Headshell overhang adjustment: ± 5 mm
AUDACITY
- General Specifications: PC or Mac with an available USB port (USB 1.1 or higher) Mac running OS X 10.4 or later or PC running Windows (Vista and above)
- Installation: CD-R or CD-RW writer for burning CDs & software installation. Includes Audacity software for PC & Mac users
PERFORMANCE IN TECHNOLOGY, PURITY IN DESIGN
A perfect balance of technology and design, the sleek contemporary lines of the AT-LP5 turntable grace any room in the home, whilst delivering performance features born out of Audio-Technica's rich analogue heritage.
- Specially designed AT95Ex Dual Moving Magnet stereo cartridge
- Twist-locking tonearm mechanism for quick and easy headshell exchange
- J-shape tonearm referencing the original 1960's and 70's Audio-Technica design
- Precision machined cast aluminium record platter for perfect on-axis balanced rotation
- 5mm Audio-Technica heavy damping rubber mat for improved low-frequency reproduction
- Ergonomic Start/Stop and speed selector with 33⅓ & 45 RPM selectable speeds
- Adjustable counterweight and anti-skate control for perfect problem free playing
- Anti-vibration and damping materials used to minimise unwanted resonance
“ORIGINAL J-SHAPED TONEARM”
The original J-shaped tonearm, engineered to minimise tracking error, harks back to the original Audio-Technica designs of the 1960's and 70's, complementing the AT-LP5's clean lines and minimal design.
“EXCLUSIVELY DESIGNED CARTRIDGE”
The AT-LP5 comes with the AT95EX high performance cartridge, exclusively designed for the turntable, and fitted on an AT-HS10 lightweight headshell; the combination perfectly balanced for the turntable's J-shaped tonearm.
“PERFECT BALANCE OF TECHNOLOGY AND DESIGN”
The direct-drive engine provides playback for both 33⅓ and 45 RPM records, with a cast aluminium platter and thick damping mat, housed together in a structure that has been engineered for minimum chassis resonance, while retaining a discreet look.
DIE-CAST ALUMINIUM PLATTER
Aluminium platter with 5mm thick rubber-compound mat for balanced rotation and improved low frequency reproduction.
EXCLUSIVE AT95EX CARTRIDGE
AT95EX high performance cartridge , exclusively designed for the AT-LP5 and supplied on an AT-HS10 lightweight headshell.
BALANCED TONEARM
A balanced tonearm with hydraulic lift, anti-skate control and adjustable counterweight for perfect performance.
33⅓ AND 45 RPM
33⅓ and 45 RPM speeds with direct drive for stable rotation, 1.7 second start up and ergonomic selector switch