Audio-Technica AT-LP3 plokštelių grotuvas / patefonas pilnai automatinis su fonokorektorium | nemokamas pristatymas

PILNAI AUTOMATINIS PATEFONAS

• FULLY AUTOMATIC BELT-DRIVE STEREO TURNTABLE WITH UNIVERSAL TONEARM & HEADSHELL

• Fully Automatic Belt-Drive system
• Specially designed AT91R phono cartridge
• Removable universal AT-HS3 headshell
• Balanced straight tonearm
• Switchable MM & MC modes
• 33⅓ & 45 RPM selectable speeds

• Išmatavimai	435 mm ×353 mm×128 mm (W×D×H)
  Svoris	5.2kg

• Produkto savybės

  

  • ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE

    A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

    • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
    • Balanced straight tonearm with hydraulically damped lift control and lockable rest
    • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
    • Switchable modes for moving magnet and moving coil cartridges
    • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
    • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
    • Damped base construction for reduced low-frequency feedback colouration
     

    MM / MC CARTRIDGE SELECTOR SWITCH

    Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

    AT91R DUAL MOVING MAGNET CARTRIDGE

    Specially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.

    

    UNIVERSAL HEADSHELL

    Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.

    

    BALANCED TONEARM

    Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.

    

    4.5MM PLATTER MAT

    Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.

    Turntable
    Type	Fully Automatic, Belt-Drive
    Motor	DC motor
    Speeds	33-1/3 RPM, 45 RPM
    Turntable Platter	Die-cast aluminium
    Wow and Flutter	Less than 0.2% WRMS (33 1/3 RPM) at3kHz
    Signal-to-Noise Ratio	> 60 dB
    Output Level	“PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec  “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
    Phono Pre-Amp Gain	36dB nominal, RIAA equalised 56dB nominal, RIAA equalised
    Power Supply Requirements	220 to 240 V / 50, 60 Hz
    Power Consumption	2W
    Dimensions	435 mm ×353 mm×128 mm (W×D×H)
    Weight	5.2kg
    Accessories Included	Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable

    Cartridge & Stylus
    Model	AT91R
    Type	VM Dual Magnet
    Output Voltage	3.5mV (mV at 1kHz, 5 cm/sec)
    Vertical Tracking Force Range	1.5 to 2.5g (standard 2.0g)
    Stylus Construction	0.6 mil bonded conical
    Cantilever	Aluminium pipe
    Recommended Load Impedance	47,000 ohms
    Weight	5.0g

    Headshell
    Model	AT-HS3
    Weight	11.1g
    Overhang Adjustment	8mm

    Tone arm
    Type	Static balanced straight shaped with soft damping control
    Effective Length	221.5mm
    Overhang	19mm
    Maximum Tracking Error Angle	Less than 3°
    Stylus Pressure Adjustment Range	1 to 4g
    Applicable Cartridge Weight	14.5 to 20g
    Anti-skating Range	0 - 3 g